Yes - those El Salvadoreans - since they are born with only 3 fingers on each hand, they have a very difficult time using tools that were designed for people with 5 fingers on each hand.
Or.... “In the last decade, most of the big U.S. airlines have shifted major maintenance work to places like El Salvador, Mexico, and China, where few mechanics are F.A.A. certified and inspections have no teeth.”
Many air carriers perform heavy maintenance checks (which are labor intensive, taking the interior of the aircraft out and later re-installing everything) in lower-cost labor areas, all the while under the supervision of FAA-licensed mechanics, to the same published standards, at the same schedules as if it were done at a US maintenance base.
US-based labor, unions, and other pro-US-labor supporters are up in arms over it, using typical "dirty, lazy, substandard foreigners" scare tactics and implying that the safety is compromised in pursuit of dollars.
mobilefriendly is implying that aircraft mechanics in El Salvador are somehow less qualified to maintain Southwest's fleet than (presumably) American aircraft mechanics.
Probably because they don’t have the same level of professional certification and legal oversight as the FAA ensures for maintenance work performed in the USA.
> The work is labor-intensive and complicated, and the technical manuals are written in English, the language of international aviation. According to regulations, in order to receive F.A.A. certification as a mechanic, a worker needs to be able to “read, speak, write, and comprehend spoken English.” Most of the mechanics in El Salvador and some other developing countries who take apart the big jets and then put them back together are unable to meet this standard. At Aeroman’s El Salvador facility, only one mechanic out of eight is F.A.A.-certified. At a major overhaul base used by United Airlines in China, the ratio is one F.A.A.-certified mechanic for every 31 non-certified mechanics. In contrast, back when U.S. airlines performed heavy maintenance at their own, domestic facilities, F.A.A.-certified mechanics far outnumbered everyone else. At American Airlines’ mammoth heavy-maintenance facility in Tulsa, certified mechanics outnumber the uncertified four to one. Because heavy maintenance is labor-intensive and offshore labor is cheap, there’s a perception that the work is unskilled. But that’s not true. If something as mundane as the tray of a tray table becomes unattached, the arms that hold it could easily turn into spears.
> There are 731 foreign repair shops certified by the F.A.A. around the globe. How qualified are the mechanics in these hundreds of places? It’s very hard to check. In the past, when heavy maintenance was performed on United’s planes at a huge hangar at San Francisco International Airport, a government inspector could easily drive a few minutes from an office in the Bay Area to make a surprise inspection. Today that maintenance work is done in Beijing. The inspectors responsible for checking on how Chinese workers service airplanes are based in Los Angeles, 6,500 miles away.
> Lack of proximity is only part of the problem. To inspect any foreign repair station, the F.A.A. first must obtain permission from the foreign government where the facility is located. Then, after a visa is granted, the U.S. must inform that government when the F.A.A. inspector will be coming. So much for the element of surprise—the very core of any inspection process. That inspections have had the heart torn out of them should come as no surprise. It is the pattern that has beset the regulation of drugs, food, and everything else.
> ...
> Airline mechanics at U.S. airports who perform routine safety checks and maintenance tasks before an airplane takes off report that they are discovering slipshod work done by overseas repair shops. American Airlines mechanics contended in a lawsuit last January that they had been disciplined by management for reporting numerous safety violations they uncovered on airplanes that had recently been serviced in China. Mechanics in Dallas said they had discovered cracked engine pylons, defective doors, and expired oxygen canisters, damage that had simply been painted over, and missing equipment, among other violations.
You are probably not familiar with the U.S. Federal Aviation Regulations. For an FAA-registered aircraft to be airworthy, it must have an inspection within the past 12 calendar months signed off by a specially trained, examined, and certified Airframe and Powerplant (A&P) mechanic further trained, examined, and certified with Inspection Authority (IA).
Airplanes flown for hire, such as commercial airliners, must have the equivalent of an annual inspection every hundred flight hours, also signed off by an IA.
So are you saying the information in the article I linked is false? That's great but it doesn't seem to have the problem licked, based on the information there.
