WD-40's advantage is that it's not terrible to get on your skin when you're out working, and it's cheap.
The people who use it are looking for cheap, mostly.
Source: farming. We have many different lubes and penetrating products for when we're in the actual shop, but in the field, nothing beats wd-40 for getting back to work fast, or unsticking some shit when all you have is a hammer and you just know when that fucking bolt comes loose it's going to throw rust and dirt all over your face.
The caveat is use the right one for the right job. There's a meme that if its not moving but its supposed to you need WD-40... well you need Silicone WD-40 or any silicone based oil like for a garage. If you use regular WD-40 in a garage it is a degreaser essentially, and your squeaking goes away momentarily, and then comes back. After I learned this, you have no idea how much silicone WD-40 I had to put in my garage to make the squeaking stop for good.
I'm unsure what your definition of "cheap" is for WD-40 but I find it to be very overpriced. If I need a universal lubricant that is readily available and cheap, I just use used motor oil.
> If I need a universal lubricant that is readily available and cheap, I just use used motor oil.
Why? Used motor oil is, well, used. It contains metal particles from the engine and combustion byproducts, which is why it was replaced in the first place. Granted, most lubrication applications aren't the marvels of precision parts moving at high speed that a modern engine is so can probably make do with poorer oil, but still.
You can buy industrial lubricants in bulk for pretty cheap so that unless you use huge quantities of it, it shouldn't make much difference.
As an aside, my aunt's husband worked more or less his entire career in a heavy truck repair shop. And he had an oil burner heating his house (you can see where this is going, eh?). So he got used engine oil for free, the shop was happy to get rid of it as disposing of it properly cost money. I think burning used engine oil was illegal already back then due to the pollution, and nowadays I think they have some government mandated accounting system to ensure that the same amount of oil is sent to proper recycling as comes in.
You're right about getting industrial lubricants in bulk for cheap. But I don't need 55 gallons of lubricant. I'd never use it all nor do I want to store it.
Used engine oil isn't really suitable for lubricating an engine anymore but it's fine for a temporary lubricant of a drill bit, some random hinge on a gate, or stubborn bushing on a piece of equipment. Engine oil is only really replaced on an engine because at some point it degrades enough that things like oil film bearings in the crankshaft would start to fail. A bushing on something like a small dump trailer doesn't rotate at 2300 rpm.
> You're right about getting industrial lubricants in bulk for cheap. But I don't need 55 gallons of lubricant. I'd never use it all nor do I want to store it.
Well, the corollary to that is that if it's just small case usage then if you buy a 1L bottle of some general purpose lubrication oil for, say, $5, then it doesn't really matter in the grand scheme of things that the price/L is a lot higher than if you buy an entire drum of the stuff. ;-)
> Used engine oil isn't really suitable for lubricating an engine anymore but it's fine for a temporary lubricant of a drill bit, some random hinge on a gate, or stubborn bushing on a piece of equipment. Engine oil is only really replaced on an engine because at some point it degrades enough that things like oil film bearings in the crankshaft would start to fail. A bushing on something like a small dump trailer doesn't rotate at 2300 rpm.
Fair enough. I guess I just don't see the benefit here vs just having some bottle of cheap unused lubricant. Except if used engine oil is the only thing you happen to have at hand.
The WD in WD-40 stands for "water displacer." It makes water go somewhere else. Secondarily, it is a solvent, and it's great for dissolving glues, like the glue used to affix government-issued tax licenses to automobiles. It's not really a lubricant, but in a pinch it can temporarily function as one.
I like Swiss army knives, but they collect lint and gunk from my pockets. I use WD-40 to dissolve gunk, and to drive out water after an ultrasonic bath, but I lubricate with the light machine oil used for barber's clippers.
It is a blend of oils.
Light oils evaporate (like kerosene does for example), and dissolve thicker oils and grease.
Oils displace water in general and once in the surface pores they prevent water from getting in there again, a mixture containing light oils flows in easier and does that better.
Being predominantly a light oil it is a poor lubricant, but it is better than nothing, and can flow in crevices where thicker stuff would not.
It is really simple and there is no magic.
The name took off as a brand and completely different stuff from the 40th iteration of a Water Displacer formulation is being sold under it as well.
> It's not really a lubricant, but in a pinch it can temporarily function as one.
That's wrong. WD-40 is a literally a lubricant mixed with a solvent that makes it very fluid so it can enter small interstices, the solvent then evaporates quickly, leaving the lubricant in place.
There's not a lot of lubricant in there compared to a pure lubricant, because the solvent takes a significant share of the volume, but it's still a lubricant once the solvent dries up.
You're technically correct, the best kind of correct.
However, if you're looking to lubricate something and have it last for a reasonable time, then WD-40 is a poor choice. However, using WD-40 first to hopefully dissolve contaminants/rust and remove water and then after a quick wipe to remove excess, applying something better such as 3-in-1 or silicone grease etc is a good idea.
The clue is in the name - Water Displacement 40.
If you want a spray on penetrating lubricant, then GT-85 is usually better as it has PTFE included to better lubricate. It still won't last that long though as it'll only make a thin film.
Edit: I've just seen that WD-40 make mention of a bus driver in Asia using WD-40 to remove a python from his bus' under-carriage. If in doubt, spray it with WD-40.
It literally says it is a lubricant on the can but you can’t find a thread on the Internet about it without someone saying that. It is a lubricant, just not a very good one for most situations.
I’m not surprised. If your hobbies include things that take you to the DIY corners of Reddit you are exposed daily to the “WD-40 is not a lubricant” morons who cannot be swayed by either reading the can or Googling.
“WD-40 is not a very good lubricant and you should almost always use something else” is a mouthful I guess, but their denial of reality over something so meaningless is always astounding to me.
There is a certain type that loves to be contrarian, and they keep a whole mental library of "unintuitive factoids" at the ready for the topic to arise.
The unexpected part though, is that I don’t think this is causing people to actually believe that WD-40 is not a lubricant. It’s causing them to post that perhaps.
And it seems like such a strange thing to become emotionally attached to. But these people will sooner die then admit the thing that says it is a lubricant is a lubricant.
>is that I don’t think this is causing people to actually believe that WD-40 is not a lubricant.
Why do you believe this? The vast majority of people commenting on the internet haven't used WD-40 in the past year. Why wouldn't they end up believing a wrong thing that has been confidently stated that they otherwise know nothing about?
People have always loved these factoids, long long before the internet. It was common conversation fodder for upper class folks in history to repeat outright falsehoods as "um actually"s or "You should know"s.
Do you know how many people for whatever reason believe that Columbus believed the earth was round and everyone else thought it was flat, despite all historical evidence being contrary?
Basically "Common consensus is X but I'm super smart and know REAL truth Y" is like the optimal meme shape for the human brain. The biases in our brain will always support such an argument shape, and humans get a reward for relaying that info, correct or not. All our innate and fundamental physiological biases will be triggered by this kind of statement.
IMO the super interesting aspect is the second and third generations of "Um actually" where a previous "um actually" gets further "um actually!"d, and even that gets "um actuallyyyyy"d. I wonder if we will get a cycle at some point!
Some things are lubricants for a little while, until they suddenly become the opposite. Wood glue, for example.
That’s how I would describe the original and most common WD-40 formula: a passable short-term lubricant for quick and dirty jobs, but not a long-term high quality lubricant, like, say, 3-in-1 (graphite) or silicone lubricants.
Adding to the confusion is that WD-40 sells a silicone lubricant that is a much better lubricant for many purposes than the original formula.
Yeah, it mostly evaporates and only leaves a thin film behind. It's better than nothing if there's no lubricant in place, but will actually make things worse if there is a functional lubricant in place.
I just bought a little bottle I can squeeze from harbor freight. One drop is usually enough. If I need to I can give it a big squeeze and get a bunch out.
Isn't a pretty wide range of products you'd use for this? I guess vegetable oil isn't and it works fine. Fluidfilm I don't think is either. I wear PPE for this reason however.
If you want a clean cheap petroleum oil, chainsaw bar oil will work. Generally I prefer the generic Tractor Supply bar oil because it seems a lot stickier than walmart's version which seems more like hydraulic fluid to me. But either way it is cheap because in a chainsaw 95% of it is just sprayed all over the place anyways.
The last time I bought chainsaw bar oil I think it has added sulfur or something like that. I'm not really sure. It's actually worse to work with than used motor oil. Used motor oil starts out clean & is constantly being filtered in a normal motor.
Might just depend on the brand and luck. Ive always suspected that bar oil was either extra of whatever oil product didn't sell at the time, or an oil product that didn't technically meet spec for another application like hydraulic or transmission or engine oil.
silly goose, everyone knows you have to use fresh lemon juice on motherboards and ssds. the electrolytes from the lemon help speed up and cleanse the circuitry.
The people who use it are looking for cheap, mostly.
Source: farming. We have many different lubes and penetrating products for when we're in the actual shop, but in the field, nothing beats wd-40 for getting back to work fast, or unsticking some shit when all you have is a hammer and you just know when that fucking bolt comes loose it's going to throw rust and dirt all over your face.