3-in-1 oil. PB blaster and liquid wrench are more for breaking apart rusted together bolts and pins and stink too much to want to use in your house. You really don't want any kind of spray can for door hinges because door hinges need less than a single drop of oil to be fully lubricated.
Petroleum oils aren't really good for hinges (which I assume is what is squeaking) for a variety of reasons. If you use wd-40, you find that the squeak goes away and quickly returns, sometimes worse. The reason for this is that WD-40 will wash out any grease or oil in the hinge as well as attract whatever dirt or dust is around, both worsening the squeak.
3-in-1 (in the dropper can) is a good, effective lubricant but it has an important drawback that is shares with WD-40, it will wash out any grease already in there as well as attract dirt. 3-in-1 (tin dropper bottle) is great for light mechanical duty like a bike chain or as cutting oil and even some gears, but it wont work well as a deck lube, way oil, or hinge grease because of its very light weight.
Lithium grease (sometimes called White Grease) is excellent for door hinges because it is dry, wont drop, will spread instead of being pushed out like oil (even 3-in-one), and lasts forever. Since its pretty dang thick and not really a liquid even in the spray version, it also wont drip onto your carpet as readily while you apply it. Get the spray version, protect the paint behind the hinge with a towel or a piece of printer paper(TIP: Cut the paper %85 of the way in half long-way (hotdog fold) and slide the paper over the hinge as you spray it with the door closed and from a bit of an angle, pay more attention to the top part, just under the head of the hinge pin. That should be more than enough. Spray-on oil would soak the paper, lithium grease won't so this is another benefit of lithium)) and give it a couple squirts while working the door. Wipe the excess off and enjoy years of squeak-free operation!
It is perfect for light-duty applications where the lube sticking to its lubricating point is important. White Lithium Grease is [Edit, its Lithium soap? whatever that is.] and mineral oil, sticks to metal excellent, and is compatible with almost all bushing rubber.
You can also literally just spray a rubber or plastic part with Lithium Grease (or just silicone oil, which is cleaner and much better for rubber and plastics but IMPOSSIBLE to clean, so DO NOT SPILL and wear gloves. Seriously: https://news.ycombinator.com/item?id=30286616 ) to protect/shine them up. It will work totally well on your tires, but I don't like that idea because it might fling onto your paint or transfer to your rotor if you touch it while swapping wheels. Seems it might work well to prevent dry-rot during storage, now that I think about it. I feel like basically nobody does this though.
Thank you for this opportunity. I had a lot of fun thinking about one of my favorite lubricants, which is of course silicone, and I expect that it will add much value to your life!
I'm not shooting WD40 or dripping oil onto a hinge, garage door part, etc, etc because it's the best. I'm doing it because I can do that a hundred times before coming close to the time and effort expenditure required to disassemble the item and lube it with grease.
